FRPs & Advanced Composite
-
Mesoscale simulation method for preplaced aggregate concrete based on physics engineProf Feng Peng, Principal Inves
-
Novel bamboo-raft-type ffoating structure (BRT-FS) assembled by FRPreinforced concrete tubes: Conceptual design and a
-
Development of single-component epoxy resin with superb thermal stability, flame retardancy, smoke suppression, and
-
Transfer learning-based confinement strength prediction of concrete confined by FRP transverse reinforcementsIntroducti
-
Flexural Behavior and Design of Ultrahigh-Performance Concrete Beams Reinforced with GFRP BarsIntroductionProf Peng
-
Effect of ICCP on tensile performance and piezoresistive effect of CFRCM platesIntroductionMr Liu JiarongfromZhejian
-
Long-term properties evolution and life prediction of glass fiber reinforced thermoplastic bending bars exposed in
-
A pull-out equivalent telescopic layered failure model of carbon fiber bundles in seawater sea-sand cementitious ma
-
Multifunctional phosphorus-containing imidazoliums endowing one-component epoxy resins with superior thermal latency, h
-
Design, preparation and mechanical properties of novel glass ffber reinforced polypropylene bending barsIntroductionPr
-
Probabilistic fatigue stiffness variation of angle-ply GFRP composites considering stress ratio effectIntroductionProf
-
Shear behavior of two-span continuous concrete deep beams reinforced with GFRP bars
-
Prediction of fatigue crack propagation in center cracked steel plate strengthened with partially covered CFRP strip
-
Experimental investigation on transverse tension-tension fatigue behavior of pultruded GFRP unidirectional lamina
-
A binary resin system of epoxy and phenol-formaldehyde for improving the thermo-mechanical behavior of FRP composites
-
Analysis-oriented model for FRP tube-confined concrete: 3D interpretation of biaxial tube behaviour
Introduction
-
Application of ultra-lightweight and large-scale pultruded GFRP profile for external frame beam in high-rise buildings
Special Mortars & Concrete
-
Effect of CO2-mixing dose and prolonged mixing time on fresh and hardened properties of cement pastesPh D student
-
A Two-Step Synthesis of Porous Nitrogen-Doped Graphene for Electrochemical CapacitorsAssociate Professor YING Jie, fr
-
Effect of styrene acrylic latex on the performance of metakaolin blended cement: From hydration to mechanical prop
-
Modification of early-age microstructure and enhanced mechanical properties of cement paste via injecting low-dose C
-
Improving the interfacial properties of PVA fiber and cementitious composite: Design and characterization
-
Differences in micro grain fiber distributions between matrix and interlayer of cementitious filaments affected by extrusion molding
Introduction
Pavement for Roads & Bridges
-
Optimization design of asphalt emulsion with rejuvenator towards a uniform distribution inside the damaged porous a
-
Microscopic Properties of Asphalt and Polyethylene at an Extraordinary High Dosage through Molecular Dynamics Simulation
-
Effect of warm mix agent on the chemo-mechanical performance of binder with different oil sources
-
Comprehensive evaluation of ballastless-track sealants based on macro–micro tests and principal component analysis
-
Interfacial Performance of Asphalt-Aggregate System under Different Conditions Based on Molecular Dynamics Simulation
-
Impacts of asphalt and mineral types on interfacial behaviors: A molecular dynamics study
Construction Chemicals
Waterproofing&Repair Materials
-
Exploring the structure, characteristics, and thermal degradation of composites comprising thermoplastic polyolefin an
-
Performance of Thermal-Oxidative Aging on the Structure and Properties of Ethylene Propylene Diene Monomer (EPDM) Vulcanizates
Insulation &Composite Cladding
